AGS Classic Pinball
20 Step Refurbishment Process

Step 1: We remove ALL of the parts from the top of a playfield (plastics, light bulbs, rubber, ramps, assemblies, etc.)

Step 2: All plastics are thoroughly cleaned so that colors are crisp and vibrant. Even lighted plastic inserts are cleaned for maximum brightness!

Step 3: All ramps are completely removed, cleaned and polished using our secret process that makes them look almost brand new!

Step 4: Playfield is cleaned and polished. We use only Novus brand plastic polishes.

Step 5: Playfield is waxed with THREE coats of pinball wax.

Step 6: Brand new light bulbs, flashers and strobes are installed in the playfield and backbox. (Over 200 bulbs are replaced whether they need it or not!)

Step 7: Brand new rubber is installed on the playfield, flippers, posts, slingshots etc. In many machines, over 40 pieces of rubber are installed!

Step 8: Flippers, jet bumpers and slingshots are completely stripped down then rebuilt underneath the playfield. (This makes your pinball machine play like it just left the factory!)

Step 9: All ball troughs are cleaned and polished underneath the playfield.

Step 10: All colored inserts underneath the playfield are cleaned for maximum clarity and brightness.

Step 11: All lamp board PCB's are cleaned, checked and tested. New bulbs are installed in all lamp PCB's. We also test all working components and circuit boards for proper voltage and voltage fluctuations.

Step 12: Power supplies, bridge rectifiers, capacitors, relays and fuses are checked, restored, or replaced as necessary. Additionally, all circuit boards are tested for proper operation and voltage.

Step 13: Cabinet is cleaned on the outside and vacuumed on the inside.

Step 14: Backbox translite or backglass is cleaned both inside and out.

Step 15: Coin doors are removed and completely repainted if necessary.

Step 16: Cabinet is cleaned, then waxed for extra shine!

Step 17: Brand new pinballs are shipped with your game.

Step 18: Brand new tempered playfield glass is installed. (Not included with 1970's classic pinball machines.)

Step 19: Brand new chrome (or anodized black) legs, leg bolts, leg levelers and casters are shipped with your machine. (Not included with 1970's classic pinball machines.)

Step 20: Game and machine components are thoroughly play tested to make sure it functions according to original factory specifications.